What is fiberglass self-adhesive tape used for?

Uses: Repair drywall, gypsum board joints, cracks in various walls and other wall damage

Main properties: Excellent alkali resistance, durable: High tensile strength and deformation resistance, crack resistance: No deterioration, no foaming: Excellent self-adhesion, no need for pre-priming, quick to use, easy to apply.

Specifications: 8×8.9×9 mesh/inch: 55-85 g/m2.

Width: 25-1 000 mm: Length: 10-153 m.

Color: Usually white.

Construction method:

1. Keep the wall clean and dry.

2. Apply tape to the cracks and press tightly.

3. Make sure the gap is covered by tape, then cut off the excess tape with a knife, and finally apply mortar.

4. Let it dry naturally, then gently polish with a construction hammer.

5. Fill enough paint to make the wall surface smooth.

6. Cut off the leaked tape. Then, make sure all cracks are properly repaired and touch up around the seams with a subtle compound to make them look like new.