Reasons for folding nickel wire mesh

Let me tell you about the reason why the nickel wire mesh will be folded

Reasons for folding nickel wire mesh:

①In terms of equipment:

The linear speed of the rubber blanket and the nickel mesh is not the same;

The transmission of the rotary screen is out of step;

Axis deviation occurs on the cylinder brackets on both sides;

The deviation of the rubber blanket and the lifting failure of the idler roller.

② Machine operation:

Unreasonable choice of scraper;

The pressure adjustment of the scraper is unreasonable;

Unreasonable scraper angle;

The fluidity of the color paste is not good;

There are no specific requirements for loading and unloading of nickel mesh.

③Nickel screen plate making:

The net is not glued firmly and is not straight;

The pattern is not well developed;

Improper baking conditions.

④Types of substrates:

Different types and specifications of fabrics, the size of the colored area, and the speed of the machine all affect the service life of the rotary screen. Generally speaking, the folding rate of polyester/cotton fabrics is lower than that of pure cotton fabrics, narrow fabrics are lower than wide fabrics, and thin fabrics are lower than heavy fabrics.

Repair and use of damaged nickel mesh: For nickel mesh damaged in production, as long as it is not cracked or broken from the pattern, it can generally be repaired and reused. The repair method is: if the nickel mesh is cracked from the bulkhead, but not broken Next, you can cut a piece of flower net, apply glue (evenly mixed glue with epoxy resin and curing agent) inside, wrap it around the gap for a week, clean up the glue overflowing outside, and use it on the machine after baking.