There are three ways to judge the quality of a barbed wire

As we all know, the barbed wire is twisted and braided by the fully automatic barbed wire machine. It is commonly known as the barbed wire, barbed wire and barbed wire among the people. The finished products are single wire twisting and double wire twisting. The raw materials are made of high quality low carbon steel wire. The surface treatment process is made of electric galvanizing, hot dip galvanizing, plastic coating, plastic spraying, etc., with blue, green and yellow colors.

The protective effect of the barbed rope will be directly affected by the technical workers in the processing operation, so what are the characteristics of the high-quality barbed rope?

First of all, from the overall point of view of the thorn rope, not a large area of the thorn, lack of thorn, because of mechanical failure and other reasons should be the total length of the thorn should be less than 3 meters, no twisting the top thorn rope will not be able to play a protective role.

Secondly, check whether the twisting structure of the thorn rope is tight and full, because the four spines of the good quality thorn rope are basically 90 degrees vertical, so as to achieve the best protection effect. If there is a tilt or two thorns parallel, it will seriously affect the isolation and protection effect of the thorn rope. There is to check whether the knitting is strong and tight, processing speed is too fast quality can not be guaranteed, so the processing of thorn rope is not beautiful, and reduce the service life and protection effect.

Finally, it is to check the spikes on the top. The spikes of high-quality thorn ropes are sharp and neat, and there will be no extrusion waste.