How to weave stainless steel mesh

Stainless steel mesh is made of stainless steel wire, called 304 stainless steel braided mesh. There are galvanized wire, iron wire and stainless steel wire in daily life. Many people think that stainless steel wire is galvanized wire. In fact, there is a big gap between the two, no matter in use or effect, they are not the same, let me introduce galvanized wire and stainless steel wire to you.

Features of galvanized wire: galvanized wire has strong resistance and elasticity, and the highest zinc content can be 300 grams per square meter. The surface of galvanized wire has a thicker galvanized layer and strong corrosion resistance. It is used in practical products, mostly in dry construction handicrafts, weaving, wire mesh road guardrails, 304 stainless steel screens, etc. Galvanized wire has cold plating The difference between zinc and hot-dip galvanizing is that hot-dip galvanizing is dip-coating in a heated and melted zinc solution, the production speed is fast, and the galvanized layer is thick but not uniform. Cold galvanizing is also called electroplating. It uses electrolytic equipment to degrease the pipe fittings, pickle them, put them in a solution composed of zinc salt, and connect the negative side of the electrolytic equipment. Put a zinc plate on the opposite side of the pipe fittings and connect them to the electrolytic When the equipment is connected to the power supply, a layer of zinc will be deposited on the pipe fittings by using the current to move from positive to negative. The cold-galvanized pipe fittings are processed first and then galvanized. If the market permits, the minimum thickness is 45 microns, and the maximum thickness can reach more than 350 microns. The color is darker, and the zinc consumption is larger, but its resistance is better, especially in other environments.

Hot-dip galvanizing can last for decades, but cold-dip galvanizing can't last that long.

The production speed of cold-dip galvanizing is slow, the coating is uniform, the coating is thin, the appearance is bright, and the corrosion resistance is poor. It will corrode in a few months. Compared with hot-dip galvanizing, the production cost of electro-galvanizing is lower.

Stainless steel mesh has a history of many years. In my country's stainless steel market, there are many products, including plain stainless steel mesh and twill stainless steel mesh. Customers want to buy a better quality stainless steel mesh, but they don't look for materials from the Internet to look after. This is because customers only trust the brand image of the manufacturer, but good manufacturers over the years

Brand image, quality problems are common.

For dry stainless steel mesh, the quality of the product is the fundamental requirement. If the product is not out of order, it means that the customer saves the repair cost. If the customer buys an unqualified stainless steel mesh, the customer will spend a lot of money. Energy to repair. He even has to re-purchase it, which will incur a lot of expenses. Therefore, to buy a good stainless steel mesh palmistry, it depends on its quality and cannot consider the brand image of the manufacturer. In other words, it is a wrong choice to pursue the brand. , for a stainless steel mesh product, the quality of the product is the main thing, even if the product has good corrosion resistance, stretchability and smooth mesh surface, but some of its technical parameters are not up to standard, it is unreliable Products, I hope you can call our factory hotline, and communicate with us.